OPERATION
7
POWER AND BASIC ADJUSTMENTS
Turn the Unit ON or OFF
Press
button to turn the unit ON. When the unit is switched on, press and hold
button for
2 seconds to switch the unit OFF.
A “GOOD BYE” message is displayed to confirm power down.
Sound Adjustments
Press and release
VOLUME/SEL
knob to choose sound settings in the following order: BASS-
TRE-BAL-EQ
Bass
– Choose from -7 to +7
Treble
– Choose from -7 to +7
Balance
– Choose Left or Right (up to 7 steps in either direction)
EQ
– If “OFF” turn knob to the right and choose from pre-programmed tone settings*:
o
Classical
o
Rock
o
Pop
o
Flat
o
Jazz
o
EQ OFF
*Note: If one of the EQ sound settings is chosen, manual Bass and Treble adjustments are disabled.
O
nly “BAL” and the name of the EQ setting will show in the Sound Adjustment menu. To disable the
EQ and allow manual Bass/Treble setting, simply scroll through the settings until “EQ OFF” is
displayed.
Setting Adjustments (USB, Bluetooth or AUX Sources)
Press and hold
VOLUME/SEL
button for the setting menu: ALARM ON/OFF-SLEEP ON/OFF-
BEEP ON/OFF-CLOCK 12/24 - P_VOL
In each menu item, rotating the
VOLUME/SEL
knob selects them and allow you to rotate
through the sub-settings.
Setting Adjustments (AM/FM Source ONLY)
The AM/FM source adds additional settings to the adjustment menu. Press and hold
VOLUME/SEL
button for the setting menu: ALARM ON/OFF
– SLEEP ON/OFF -BEEP ON/OFF-
CLOCK 12/24 - P_VOL
– CT SYNC
or CT INDEP
– AREA USA
or AREA EUR
– DX
or LOC
–
STEREO
or MONO
In each menu item, rotating the
VOLUME/SEL
knob selects them and allow you to rotate
through the sub-settings. The additional AM/FM settings are:
o
CT SYNC or CT INDEP
– allows the clock to synch with the radio station’s RDS
time feed (SYNC) or to be set independently (INDEP) by the user
o
AREA USA or AREA EUR
– Selects the region: USA or Europe
o
DX or LOC
– Selects distance (DX) or local (LOC) for optimized reception
o
STEREO or MONO
– Selects a stereo or mono broadcast reception
