Most modern vehicles have speakers that are mounted directly to the
structure of the door. Access is achieved by the removal of the door
panel. Some vehicles may only require the removal of a small panel
around the speaker itself.
Once the factory speakers are
removed, check the fit and
determine if there is enough
depth clearance for the new
speaker. A good way to do this is
to roll the window down and back
up while holding the speaker in
place. If you decide to run wires,
make sure to use factory harness
boots and grommets where ever
possible.
Access and
remove factory
door speakers
Fit and Wiring
Factory speaker removal
A
B
It’s a good idea to confirm that you have purchased the correct size
speakers to fit your vehicle. If you have any reservations about being
able to complete the installation yourself, we recommend contacting a
professional. The removal of interior panels can be tricky and may require
special tools. Disconnect the negative terminal of the vehicle battery
during the installation, in order to avoid possible short-circuits.
Be careful as you go.
General
