MB MACHINE BLADE PRO User Manual Download Page 10

OTHER TIPS

A. When starting out with this product, it is highly recommended to use light pressure during grinding.

Light pressure means more grinding passes are required until you get to your desired sharpness but

it also decreases the chances of over grinding.

B. As you become more adept at using the product you can start experimenting and establish a technique

more suitable for you.

C. When sharpening a badly nicked or scarred blade it is best to keep the line straight by aligning the

movement of the grinder with the back side or the left side of the blade rather than aligning with the

sharp edge or right side of the blade.

D. Although it is highly recommended that you position the moveable joint of the Guide Arm towards

you, it is also possible to position it in the opposite direction when in use. Just make sure to test it

first before using it as it may obstruct certain movements.

E. It is highly recommended to balance the blade after sharpening. There are many methods of doing

this. There are establishments that offer the service and there are also do-it-yourself methods which

can be found on the internet.

PRODUCT CARE AND MAINTENANCE

A. Wipe the Blade Pro Sharpener clean with a dry cloth after every use.

B. Regularly apply a light coat of oil or any anti-rust solution on the Guide Arm, Guide Arm Bushing,

and Guide Rod.

C. For any repairs or replacement of parts always consult an authorized agent.

WARRANTY

We warrant this product against any manufacturing defects in material and workmanship for a period 

of one (1) year from date of purchase. This warranty is valid only by completion of the warranty card 

AND original or photocopy of sales receipt. 

This warranty does not cover any defects or damages caused by the following: 

• Misuse of the product

• Negligence or lack of maintenance

• Normal wear on parts

• Use of parts not manufactured by the manufacturer

• Modification or removal of parts

NOTE: DO NOT RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.

To make a claim, write to MB Machine LLC at the address below. Customer Service will inform you of 

the appropriate procedure to follow. The Warranty Card together with the sales receipt must be presented 

when Warranty Services are required. 

The purchaser is responsible for all related expenses if product is not covered under warranty. 

MB Machine LLC

Address: 1430 Enterprise Ave. 

Myrtle Beach, SC 29577

Email: [email protected]

Summary of Contents for BLADE PRO













Reviews: