MB Connect Line mbNET.rokey RKH 210, Manual

Page: 74 / 324

23.4.2 System > Web > System Services
System Services
Function Description/content
Enable access to
Quickstart WITHOUT
credentials This function is only relevant if you operate the router in the mbCONNECT24 portal
(Cloudserver).
You can find a description of this function in the mbCONNECT24 online help.
Enable login via GET-
Arguments Checkbox to activate / deactivate this function.
Beyond the login, no other parameters are taken into account.
https://192.168.0.100/login?username=[USERNAME]&password=[PASSWORD]
Disable Communi-
cation Webservice
(SMS/Email) Checkbox to deactivate / activate the function. If this function is activated, neither
an SMS nor an e-mail can be sent from the device.
Disable Web
configuration (only re-
versible by loading
factory default set-
tings!) By activating the checkbox, access to the mbNET web interface is completely
blocked.
ATTENTION: Once the web configuration is disabled, it can only be restored to its
factory settings by rebooting the mbNET.
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
Page 74 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |