Allgemeiner Sicherheitshinweis:
Nicht mehr benötigte Verpackungsmaterialien und Kleinteile von Kindern fernhalten! Schwere Elemente nicht alleine heben!
2. Step
Insert the stabilising pin (F) in the middle hole on both ends of the side rails (2) and hammer
until it reaches the bottom.
3. Step
With the use of 4x15 screws secure the flat fitting (D) to the side rails (2) as per the marked
holes.
4. Step
With the use of Spax 5x25 screws and a drill-driver secure the “UT” fittings (G) to the side rails
from the foot end (2) as per the marked holes. IMPORTANT: Use the Spax 5x25 screws (4 pcs.
per one fitting).
