Allgemeiner Sicherheitshinweis:
Nicht mehr benötigte Verpackungsmaterialien und Kleinteile von Kindern fernhalten! Schwere Elemente nicht alleine heben!
ASSEMBLY MANUAL
LOOP BED
08/2013
To assemble the bed you require
drill-driver, Philips screwdriver, 8mm hex key, hammer, two adults.
The set includes:
Head/foot end (1) – 2 pcs.
Side rail (2) – 2 pcs.
Middle bar (3) – 1 pc.
Middle leg (4) – 1 pc.
Construction bar with legs (5) – 1 pcs.
Maxifix cam (A) – 8 pcs.
Maxifix coupling (B) – 8 pcs.
Maxifix bolt (C) – 8 pcs.
Flat fitting (D) – 2 pcs.
“L” fitting (E) – 2 pcs.
Stabilising pin (F) – 4 pcs.
“UT” fitting (G) – 2 pcs.
4 x 15 screw (short) – 14 pcs.
5 x 25 Spax screw (long) – 12 pcs.
1. Step
Screw the Maxifix couplings
(B) clockwise with the 8mm
hex key to the outer holes on
the ends of the bed side rails
(2). IMPORTANT: The
coupling has to be screwed
until it’s aligned with the
wood surface (no deeper).
