6
7
03 How to use
3. Deletion of all the cards registered
4. Fingerprint registration method
➊
Open the battery cover on the indoor unit of the door lock (the indoor part) with the door
open, and press the registration button
②
on the right bottom side.
➋
On the screen, the numbers 1,2,3,7,8,9 are lit.
(If transmission module isn’t connected, only 1,3,7,8,9 are lit)
➌
Press ‘7’ — on the screen, ‘#’ is lit (the card deletion ready)
➍
When you press and hold ’#’ for 3 seconds, all the cards will be deleted, with a
notification sound.
➊
Open the battery cover on the
indoor unit of the door lock
(the indoor part) with the door
open, and press the registration
button
②
on the right bottom
side.
➋
On the screen, the numbers
1,2,3,7,8,9 are lit.
(If transmission module isn’t
connected, only 1, 3, 7, 8, 9
are lit)
➌
Press”3”-the fingerprint
registration ready
(number is lit and then the
numbers 1, 2, 3, 4 are lit)
➍
As soon as the numbers blink,
touch your fingerprint to the
fingerprint reader
(a total of 4 times)
(continuous registration possible),
(Max. 100 fingerprints)
➎
Press the registration number
②
on the indoor unit
(the fingerprint registration
finished).
※ Press the card registration
button Press “3” Register
the same fingerprint 4 times
in a row as for the card
registration button, you are
advised to register the same
one at several angles.
※ Since the Fingerprint Identification Digital Door Lock is used as an authentication
means, it guarantees no risk of loss, theft, or hacking. Also this model uses a semiconductor method
sensor so it is safe due to no residual fingerprint left on the sensor unit.
※ When you register your fingerprint, you must register it four times. This thus reduces an identification
error to the maximum.
※ However, fingerprint registration may not be done, depending on the status of individual fingerprints.
5. Deletion of the whole fingerprint registered
6. Ways to set automatic locking / Manual locking
7. Automatic locking time setting change method
➊
Open the battery cover on the indoor unit of the door lock (the indoor part) with the door
open, and press the registration button
②
on the right bottom side.
➋
On the screen, the numbers 1, 2, 3, 7, 8, 9 are lit.
(If transmission module isn’t connected, only 1, 3, 7, 8, 9 are lit)
➌
Press ‘9’ - on the screen ‘#’ is lit(the fingerprint deletion ready)
➍
When you press and hold ‘#’ for 3 seconds, the whole fingerprint will be deleted,
with a notification sound.
How to set into automatic lock
Press the OPEN/CLOSE button for more than 5 seconds and press the number ‘1’ button.
Then, a Beep bee beep sound comes out and the system is set into Auto Lock.
How to set automatically closed time
Press and hold the Open/Close button for at least 5 seconds, a notification sound is heard,
press ‘8’ first, press the number you want to set among the number ‘1’~’8’
(‘5’ for 5 seconds), and press ‘*’.
How to set into manual lock
Press the OPEN/CLOSE button for more than 5 seconds and press the ‘1’ button.
Beep sound comes out and the system is set into manual lock.
•
Beep bee beep sound-Auto Setting
•
Beep sound - Manual setting
※ When products are delivered,
they are set into Auto Lock.
