1.
MEMORY PRESETS: In
satellite radio mode,
there
are 30 available presets, 10 each
for SAT1, SAT2 and SAT3. To
save satellite channels in your
memory presets, tune to the desired channel then press and hold a
preset control until sound returns.
2.
SOUND:
Press repeatedly to
cycle through the following
features:
BASS:
Press SOUND repeatedly to reach the bass setting. Press
SEEK/TRACK
to adjust the level of bass.
TREBLE:
Press SOUND repeatedly to reach the treble setting. Press
SEEK/TRACK
to adjust the level of treble.
BALANCE:
Press SOUND repeatedly to reach the balance setting.
Press
SEEK/TRACK
to adjust the audio between the left (L) and
right (R) speakers.
FADE:
Press SOUND repeatedly to reach the fade setting. Press
SEEK/TRACK
to adjust the audio between the back (B) and
front (F) speakers.
SPEED COMPENSATED VOLUME (if equipped):
Press SOUND
repeatedly to reach the SPEED COMPENSATED VOLUME setting. Radio
volume automatically gets louder with increasing vehicle speed to
compensate for road and wind noise. Use
SEEK/TRACK
to
adjust.
The default setting is
off;
increasing your vehicle speed will not change
the volume level.
Adjust
1–7:
Increasing this setting from 1 (lowest setting) to 7 (highest
setting) allows the radio volume to automatically change slightly with
vehicle speed to compensate for road and wind noise.
Recommended level is
1–3;
SPEED OFF turns the feature off and level 7
is the maximum setting.
ALL SEATS (Occupancy mode, if equipped):
Press SOUND
repeatedly to reach the Occupancy mode setting. Press
SEEK/TRACK
to select and optimize sound for ALL SEATS,
DRIVERS SEAT or REAR SEATS.
2008 Mazda Pioneer Navigation
(maz)
Supplement
USA
(fus)
Tribute Satellite Radio
3