Mazda MX-6 1998, Workshop Manual

Page: 1256 / 1282

POWER SYSTEMS
09-21 POWER SYSTEMS
FUSE SERVICE C A U T IO N ........................09-21-1
MAIN FUSE
REMOVAL/INSTALLATION ....................09-21-1
ROOM FUSE IN STA LLA TIO N ..................09-21-1
IGNITION SWITCH
REMOVAL/INSTALLATION ....................09-21-1
IGNITION SWITCH IN S P E C T IO N 0 9 -2 1 -2
KEY REMINDER SWITCH
INSPECTIO N............................................. 0 9 -2 1 -2
FUSE SERVICE CAUTION
W 6 U 9 2 1 W 0 1
Caution
•
Determine and correct the cause of the
burnt fuse before replacing it with the
specified type. If the fuse is replaced
before doing this, it may burn again.
MAIN FUSE REMOVAL/INSTALLATION
W 6 U 9 2 1 W 0 2
1. Disconnect the negative battery cable. 4. Remove the MAIN fuse mounting bolt to remove
2. Remove the main fuse block cover. the MAIN fuse.
3. Remove the main fuse block mounting nuts. 5. Install in the reverse order of removal.
ROOM FUSE INSTALLATION
Note
• When the ROOM fuse is burnt or removed,
the malfunction indicator lamp illuminates. If
the ROOM fuse is replaced or installed with
the ignition switch at ON, the malfunction
indicator lamp will continue to illuminate.
1. Turn the ignition switch to LOCK.
2. Install the ROOM 10 A fuse.
W 6 U 9 2 1 W 0 3
ROOM 10 A FUSE
W 6 U 9 2 1 W A 0
IGNITION SWITCH REMOVAL/INSTALLATION
W 6 U 9 2 1 W 0 4
1. Disconnect the negative battery cable. 5. Install in the reverse order of removal.
2. Remove the column cover.
3. Disconnect the ignition switch connector.
4. Remove the screw to remove the ignition switch.
CONNECTOR
IG N IT IO N S W IT C H
W6U921WA1
0 9 -2 1 -1