Black plate (183,1)
NOTE
l
The headlights, other exterior lights and instrument panel illumination may not turn
off immediately even if the surrounding area becomes well-lit because the light sensor
determines that it is nighttime if the surrounding area is continuously dark for several
minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking
lots.
In this case, the light turns off if the light switch is turned to the OFF position.
l
The instrument panel illumination can be adjusted by rotating the knob in the
instrument cluster. To adjust the brightness of the instrument panel illumination: Refer
to Instrument Panel Illumination on page 5-41.
l
When the headlight switch is in the AUTO position and the ignition is switched to
ACC or the ignition is switched off, the headlights, other exterior lights and
instrument panel illumination will turn off.
l
The sensitivity of the AUTO lights may be changed by an Authorised Mazda
Repairer.
q
Lights-On Reminder
If lights are on and the ignition is
switched to ACC or the ignition is
switched off, or the key is removed from
the ignition switch, a continuous beep
sound will be heard when the driver's
door is opened.
q
Headlight High-Low Beam
Press the lever forward to turn on the high
beams.
Pull the lever back to its original position
for the low beams.
High beam
Low beam
Driving Your Mazda
Switches and Controls
5-53
Mazda5_8DF6-EI-13J_Edition7 Page183
Thursday, March 9 2017 8:35 PM
Form No.8DF6-EI-13J
