Mazda CX-8 Quick Manual Download Page 547

Page: 547 / 624

Towing Hooks

CAUTION



The towing eyelet should be used in an
emergency (to get the vehicle out of a
ditch or a snow bank, for example).



When using the towing eyelets, always
pull the lead or chain in a straight
direction with respect to the eyelet. Never
apply a sideways force.

NOTE

When towing with chain or lead, wrap the
chain or lead with a soft cloth near the
bumper to prevent damage to the bumper.

▼

Towing Hooks

1. Remove the towing eyelet and the

wheel brace from the luggage
compartment (page 7-3).

2. Wrap a flathead screwdriver or similar

tool with a soft cloth to prevent
damage to a painted bumper, and open
the cap located on the front or rear
bumper.

Front

Rear

CAUTION

Do not use excessive force as it may
damage the cap or scratch the painted
bumper surface.

NOTE

Remove the cap completely and store it
so as not to lose it.

3. Securely install the towing eyelet using

the wheel brace or equivalent.
Consult an Authorised Mazda
Repairer.

Front

Wheel brace

Towing
eyelet

If Trouble Arises

Emergency Towing

7-21

CX-8_8HJ9-EI-19E_Edition2_old

2020-4-15 13:00:04

Summary of Contents for CX-8

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands

Mazda CX-8, Quick Manual

Search results

Summary of Contents for CX-8

Reviews:

Related manuals for CX-8

Brands by name

Popular brands