Mazda CX-5, Manual

Page: 185 / 840


When the lights are turned on, the
lights-on indicator light in the
instrument cluster turns on.
Refer to Headlights on page 4-87.
The brightness of the instrument cluster
and instrument panel illuminations can be
adjusted by rotating the knob.

The brightness decreases by rotating the
knob to the left. A beep sound will be
heard when the knob has been rotated to
the maximum dim position.

The brightness increases by rotating the
knob to the right.
Dim
Bright
Function for cancelling illumination
dimmer
The illumination dimmer can be cancelled
by rotating the instrument panel
illumination knob to the right until a beep
sound is heard while the instrument cluster
is dimmed with the ignition switched ON.
If the instrument cluster's visibility is
reduced due to glare from surrounding
brightness, cancel the illumination
dimmer.
NOTE

The illumination dimmer can be
cancelled by pressing the instrument
panel illumination knob. (without speed
unit selector)

When the illumination dimmer is
cancelled, the instrument cluster cannot
be dimmed even if the lights are turned
on.

When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display of
the daytime screen.
▼ Speed Unit Selector
*
In some countries, you may have to
change the speed units between km/h and
mph.
When pressing the selector knob, the
speed units in the instrument cluster will
change.
Selector knob
▼
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE

Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:

Significantly cold or hot temperatures.

Sudden changes in outside
temperature.
When Driving
Instrument Cluster and Display
*Some models.
4-27
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48