Mazda CX-5 2018, Owner'S Manual

Page: 231 / 787

$XWRZLSHUFRQWURO
:KHQWKHZLSHUOHYHULVLQWKH
SRVLWLRQWKHUDLQVHQVRUVHQVHVWKHDPRXQW
RIUDLQIDOORQWKHZLQGVFUHHQDQGWXUQVWKH
ZLSHUVRQRURIIDXWRPDWLFDOO\
RIIʊLQWHUPLWWHQWʊORZVSHHGʊKLJK
VSHHG
7KHVHQVLWLYLW\RIWKHUDLQVHQVRUFDQEH
DGMXVWHGE\WXUQLQJWKHVZLWFKRQWKH
ZLSHUOHYHU
)URPWKHFHQWUHSRVLWLRQQRUPDOURWDWH
WKHVZLWFKXSZDUGIRUKLJKHUVHQVLWLYLW\
IDVWHUUHVSRQVHRUURWDWHLWGRZQZDUGIRU
OHVVVHQVLWLYLW\VORZHUUHVSRQVH
Higher sensitivity
Less sensitivity
Switch
Centre
position
&$87,21
¾
Do not shade the rain sensor by adhering
a sticker or a label on the windscreen.
Otherwise the rain sensor will not
operate correctly.
¾
When the wiper lever is in the
position and the ignition is switched ON,
the wipers may move automatically in
the following cases:
¾
If the windscreen above the rain sensor
is touched or wiped with a cloth.
¾
If the windscreen is struck with a hand
or other object from either outside or
inside the vehicle.
Keep hands and scrapers clear of the
windscreen when the wiper lever is in the
position and the ignition is
switched ON as fingers could be pinched
or the wipers and wiper blades damaged
when the wipers activate automatically.
If you are going to clean the windscreen,
be sure the wipers are turned off
completely (when it is most likely that the
engine is left running) this is particularly
important when clearing ice and snow.
NOTE
•
Switching the auto-wiper lever from the
to the position while driving
activates the windscreen wipers once,
after which they operate according to
the rainfall amount.
•
The auto-wiper control may not operate
when the rain sensor temperature is
about –10 °C (14 °F) or lower, or about
85 °C (185 °F) or higher.
•
If the windscreen is coated with water
repellent, the rain sensor may not be
able to sense the amount of rainfall
correctly and auto-wiper control may
not operate properly.
:KHQ'ULYLQJ
6ZLWFKHVDQG&RQWUROV