4–68
When Driving
i-ELOOP
i-ELOOP Indicator Light/Control
Status Display
The driver is noti
¿
ed of the i-ELOOP
power generating status and the vehicle
conditions by the i-ELOOP indicator light
and the control status display.
i-ELOOP Indicator Light
Illuminated (vehicle without type B
audio)
The light turns on during power
generation.
Flashing
If the engine is started after the vehicle has
not been driven for a long period of time,
the i-ELOOP indicator light may
À
ash.
Leave the engine idling and wait until the
indicator light turns off.
NOTE
y
The beep will sound if the vehicle is
driven while the i-ELOOP indicator
light is
À
ashing. In addition, if you
turn the steering wheel while the light
is
À
ashing, it will feel heavier than
normal, but this does not indicate an
abnormality. Stop the vehicle in a safe
location with the engine running and do
not attempt to turn the steering wheel.
The steering operation will return to
normal after the i-ELOOP indicator
light stops
À
ashing.
y
(Vehicles with type B audio)
A
noti
¿
cation is displayed in the center
display and the i-ELOOP indicator light
À
ashes at the same time.
Refer to Warning Message Indicated on
Display on page 7-33 .
Control status display (vehicles with
type B audio)
The i-ELOOP power generating status is
displayed in the center display.
Refer to Control Status Display on page
4-70 .
Mazda3̲8FA4-EA-15G̲Edition2.indb 68
Mazda3̲8FA4-EA-15G̲Edition2.indb 68
2015/07/16 8:44:47
2015/07/16 8:44:47