Mazda 3 2007 Owner'S Manual Download Page 97

Page: 97 / 402

Black plate (97,1)

Type B

3. Grasp the support rod in the padded

area indicated by the arrow.

Clip

Support rod

Pad

4. Secure the support rod in the stay hole

indicated by the arrow to hold the hood
open.

Without
turbocharger

With
turbocharger

Closing the Hood

1. Check under the hood area to make

certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.

2. Insert the support rod in its clip while

holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.

3. Close the hood so that it locks securely.

Knowing Your Mazda

Doors and Locks

3-23

Mazda3_8V66-EA-06F_Edition3 Page97
Wednesday, August 23 2006 11:19 AM

Form No.8V66-EA-06F

Summary of Contents for 3 2007



















































































































































































































































































































































































































Search results

Summary of Contents for 3 2007

Reviews:

Mazda 3 2007, Owner'S Manual, Page: 97 / 402

Search results

Summary of Contents for 3 2007

Reviews: