Mazda 2013 6, User Manual

Page: 441 / 574

Black plate (441,1)
Taillights (Trunk lid side)
Reverse lights
6. Install the new bulb in the reverse order
of the removal procedure.
License plate lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens,
and then remove the lens by carefully
prying on the edge of the lens with a
flathead screwdriver.
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.
q
Replacing Interior Light Bulbs
Overhead lights/Front map lights, Rear
map lights, Vanity mirror lights
í
,
Courtesy lights
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.
2. Disconnect the bulb by pulling it out.
Overhead lights/Front map lights
Maintenance and Care
Owner Maintenance
6-49
í
Some models.
Mazda6_8DL2-EA-13F_Edition1 Page441
Monday, June 10 2013 3:55 PM
Form No.8DL2-EA-13F