![Mazda 2008 MX-5 Miata Manual Download Page 337](http://html1.mh-extra.com/html/mazda/2008-mx-5-miata/2008-mx-5-miata_manual_1751570337.webp)
Black plate (337,1)
4. Wipe it as dry as you can before the
water dries on it.
5. Then allow it to dry completely before
lowering it.
CAUTION
Ø
Automatic and high-pressure car
washes are harmful to a
convertible top. Avoid them.
Ø
Don't spray water directly on the
area where the window glass and
the convertible top meet. This
would probably cause water to
enter the cabin.
Appearance (Polyvinyl only)
Dress the convertible top once a month
after washing and drying it well. For best
results, use a water-based leather
treatment or vinyl top dressing. This will
help maintain good appearance and
material condition of the convertible top.
CAUTION
Ø
Some leather treatment products
can ruin the convertible top's
gloss. Be careful of the one you
choose.
Ø
Test on an inconspicuous, small
corner of the convertible top if you
are not sure.
Ø
Don't get any car wax on the
convertible top.
If you do, remove it with a good
leather cleaner.
Ø
Too much treatment on the
convertible top can be as
damaging as too little. Follow the
manufacturer's directions.
Don't overdo it!
Ø
Let the convertible top dry
completely before lowering after
applying treatment or dressing.
q
Hardtop Maintenance
í
Washing
To help protect the hardtop's finish, use a
soft cloth or sponge to wash it.
Insects, tar, tree sap, bird droppings,
industrial fallout, and similar deposits can
damage the finish if they are not removed
immediately. When prompt washing with
plain water is ineffective use a mild soap
made for use on vehicles.
CAUTION
Ø
Don't use an automatic car wash.
Ø
Don't use strong soap, chemical
detergents, or hot water, and don't
wash the hardtop in direct
sunlight or when the surface is
warm.
Thoroughly rinse with lukewarm or cold
water. Don't allow soap to dry on the
finish.
Waxing
Wax the hardtop when water no longer
beads on the paint. Always wash and dry
it before waxing.
CAUTION
Ø
Wiping off dust or dirt with a dry
cloth will scratch the finish.
Ø
Don't use abrasive wax. This may
damage the protective coating and
discolor or deteriorate the paint.
NOTE
A spot remover to remove oil, tar, and similar
materials will usually also take off the wax.
Rewax these areas.
Maintenance and Care
Appearance Care
8-55
í
Some models.
MX-5_8X49-EA-07F_Edition2 Page337
Monday, June 25 2007 11:19 AM
Form No.8X49-EA-07F
Summary of Contents for 2008 MX-5 Miata
