Mazda 2006 MAZDA6 Owner'S Manual Download Page 114

Page: 114 / 354

Black plate (114,1)

Slide Operation

To open to any position, press the rear of
the switch.

To close, press the front of the slide
switch.

Open

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.

Sunshade

CAUTION

The sunshade doesn't tilt. To avoid
damaging the sunshade, don't push up
on it.

3-46

Knowing Your Mazda

Doors and Locks

Mazdaspeed6_8U02-EC-05H_Edition1 Page114
Friday, July 15 2005 9:45 AM

Form No.8U02-EC-05H

Summary of Contents for 2006 MAZDA6



































































































































































































































































































































































Search results

Summary of Contents for 2006 MAZDA6

Reviews:

Related manuals for 2006 MAZDA6

Brands by name

Popular brands

Mazda 2006 MAZDA6, Owner'S Manual

Search results

Summary of Contents for 2006 MAZDA6

Reviews:

Related manuals for 2006 MAZDA6

Brands by name

Popular brands