GENERAL INFORMATION
00–00–7
00–00
Arrangement of Parts
•
All disassembled parts should be carefully
arranged for reassembly.
•
Be sure to separate or otherwise identify the parts
to be replaced from those that will be reused.
Cleaning of Parts
•
All parts to be reused should be carefully and
thoroughly cleaned in the appropriate method.
Warning
•
Using compressed air can cause dirt and
other particles to fly out causing injury to
the eyes. Wear protective eye wear
whenever using compressed air.
Reassembly
•
Standard values, such as torques and certain
adjustments, must be strictly observed in the
reassembly of all parts.
•
If removed, the following parts should be replaced
with new ones:
—
Oil seals
—
Gaskets
—
O-rings
—
Lockwashers
—
Cotter pins
—
Nylon nuts
•
Depending on location:
—
Sealant and gaskets, or both, should be
applied to specified locations. When sealant
is applied, parts should be installed before
sealant hardens to prevent leakage.
—
Oil should be applied to the moving
components of parts.
—
Specified oil or grease should be applied at
the prescribed locations (such as oil seals)
before reassembly.
Adjustment
•
Use suitable gauges and testers when making
adjustments.
WGIWXX0029E
C5U0000W001
WGIWXX0031E
CHU0014W006
CHU0014W005
Summary of Contents for 2006-2008 RX7 Engine
Page 2: ......
Page 60: ...SERVICE TOOLS 01 60 2 End Of Sie 1 49 G011 201 2 Attachment...
