U N D E R H O O D
Always check the Owner’s Manual for more operating information and safety features
Under Hood
Quick Tips
2003 Mazda
MPV
page 18
page 19
Revised September 23, 2002
1. Power steering fluid
reservoir
Check with engine off; fill to
MAX mark
2. Engine coolant reservoir
Level should be between F and
L lines when cold
WARNING: Never remove
coolant reserve tank cap
while engine is running or
hot; you could get burned
Break-in period
First 600 miles: Avoid heavy
braking and acceleration; drive at
varying road and engine speeds
Tip: Follow same procedures
with overhauled engine or
when brakes are replaced
Anti-lock Brake System (ABS)*
When brake pedal is pressed, ABS
automatically reduces hydraulic
pressure to any wheel on the
verge of locking up
You may feel a slight pulsing
of the brake pedal and hear a
clicking noise; this tells you the
ABS is functioning properly;
increase pressure on pedal
for maximum braking
Tips: Maintain constant
pressure on the brake pedal
Do not pump the brakes
Tire economy and tips
Check pressure at least monthly
when tires are cold
Maintain correct front-end
alignment and tire balance; rotate
tires at 7,500-mile intervals; see
Owner’s Manual for rotation chart
Tire pressure
Decal on the edge of the
driver’s door provides tire
pressure information
Tire chains*
†
Tire chains can damage aluminum
wheels; use on steel wheels only
Tips: Use only SAE class “S”
chains, install only on front
tires; install as tightly as
possible and retighten
after driving 1/4 -1/2 miles;
chains may affect handling
Never exceed 30 mph with
tire chains
3. Automatic transaxle
fluid dipstick
Check with engine on at
operating temperature;
fluid level should be within
v-notches on dipstick
4. Brake fluid reservoir
Level should be kept at the
MAX mark on reservoir; fill
with DOT 3 fluid from a
sealed container
Traction Control System*
Automatically applies and releases
brakes to prevent excessive wheel
spin at all speeds, especially when
accelerating on slippery surfaces
5. Air filter
6. Power distribution box
(fuses and relays)
7. Battery
8. Hood support rod
9. Hood latch
Pull hood latch up, open hood
10. Engine oil filler cap
SAE 5W-20 recommended for
all temperatures
11. Engine oil dipstick
Check with engine off and at
operating temperature; do not
fill above MAX line
12. Windshield washer
reservoir
Fill with windshield
washer fluid
6
5
12
7
9 8
11
1
2
4
3
10
3.0-liter 24V V6
Gasoline
Unleaded
regular
87-octane
minimum
19.8-gallon/
75-liter tank
*Denotes optional equipment
†
See Owner’s Manual
