Mazda 2003 Miata MX-5 Owner'S Manual Download Page 177

Page: 177 / 257

7-16

In Case of an Emergency

Form No. 8R09-EA-02G

Emergency Towing

We recommend that towing be done only
by an Authorized Mazda Dealer or a
commercial tow-truck service.

Proper lifting and towing are necessary to
prevent damage to the vehicle.
Government and local laws must be
followed.

A towed vehicle usually should have its
rear wheels off the ground. If excessive
damage or other conditions prevent this,
use wheel dollies.

Towing Description

Wheel dollies

Don’t tow the vehicle pointed forward
with driving wheels on the ground.
This may cause internal damage to the
transmission.

Don’t tow with sling-type equipment.
This could damage your vehicle. Use
wheel-lift or flatbed equipment.

CAUTION

J07R_8R09_EA_02G.book Page 16 Monday, July 1, 2002 11:30 AM

Summary of Contents for 2003 Miata MX-5


































































































































































































































































Search results

Summary of Contents for 2003 Miata MX-5

Reviews:

Related manuals for 2003 Miata MX-5

Brands by name

Popular brands

Mazda 2003 Miata MX-5, Owner'S Manual

Search results

Summary of Contents for 2003 Miata MX-5

Reviews:

Related manuals for 2003 Miata MX-5

Brands by name

Popular brands