Genuine Accessories
Installation Instructions
Fender Strakes
Part Number:
0000-8L-K01
Tools Required
Applicable Models:
2004>RX8
3/31/04
Page 1 of 2
Rev. A
Package Contents
1
Preparation of Vehicle
1. Turn steering wheel so the wheel is turned outward
on the side you are installing the strakes on.
2. Using a Phillips screwdriver, remove (4) plastic
scrivets in the position as shown in Figure 1. Remove
bottom of splash guard. Save for re-assembly.
3. Put your hand between the inner fender and fender
panels and remove grille from backside by squeezing
clips. Clip position is referred to in Figure 2.
3mm
ALLEN WRENCH
SOAP & WATER
SOLUTION
RAG
RU (1)
PASSENGER SIDE
DRIVER SIDE
RL (1)
LU (1)
M4 BOLT (4)
RETAINER (4)
LL (1)
PHILLIPS
SCREWDRIVER
FIG. 1
FIG. 2
