Page 4 of 4
AS 090-M11415cma1209
12
Care and Cleaning
A. Always remove mask before washing vehicle.
B. Hand clean mask using mild soap, rinse thoroughly with
clean water and line dry completely. Do not machine dry!
C. Use Mazda Vinyl/Leather Protectant (or equivalent) to
preserve color and finish.
D. WARNING: Running up on curb will damage this product.
Manufacturer will not be responsible for damage to product
due to accident or misuse.
11
Post Installation Inspection
A. Close hood and check alignment between hood cover
and front end cover along seam (between fender and
hood). If adjustment is necessary, adjust the hood cover
by adjusting the hood cover straps. Refer to step 1.
B. If mask should flap due to high speed or wind conditions,
adjust or remove mask completely.
10
Install bottom attachments
A. Attach clips (P) to back edge of
bottom vent.
B. Attach elastics with hooks (Q) to
edge of lower fascia.
Q
Q
P
P
P
Q
Install lower vent attachments
A. Attach elastics with hooks (N) to rear edge of
lower vent.
B. Attach plastic clip (O) to rear edge of lower
vent.
9
N
O
O
N
N
N