2
WAVE 200 XL
|
User Instructions
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING
T
a
a
e allowing people to enter the pool.
WARNING
W
a
a
, disconnect the main power supply.
WARNING
Ensure that childr
e
a
a
a
a
WARNING
K
a
each of children or persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
WARNING
O
a
a
a
e
a
a
a
e
a
a
certified technician, in case of need to avoid hazard.
WARNING
The unit must be connected only to a supply circuit that is protected by a ground-fault
circuit interrupter (GFCI). This GFCI should be tested on a routine basis.
To test the GFCI, push the test button. The GFCI should interrupt power.
Push the reset button. Power should be restored. If the GFCI fails to operate in this
manner, the GFCI is defective. If the GFCI interrupts power to the power unit without the
test button being pushed, a ground current may be flowing, indicating the possibility of
an electric shock. Do not use the power unit. Disconnect the power unit and contact the
manufacturer for assistance.
WARNING
To reduce the risk of electric shock replace damaged cord immedietely. Do not use
extension cord to connect unit to electric supply; provide a properly located outlet.
Please ensure that the following PRECAUTIONS are implemented:
CAUTION
Only a trained operator should operate the Robot Pool Cleaner.
CAUTION
Operator should keep hands away from driving belt mechanism.
CAUTION
Position the Caddy and power supply at least 3.5m/12ft from pool’s edge – during
operation.
CAUTION
For continued protection against possible electric shock, the power supply unit should be
placed at least 11cm / 4’’ above ground.
READ AND FOLLOW ALL INSTRUCTIONS.
Please adhere strictly to the following WARNINGS: