![Maytronics CLASSIC 8+ User Instructions Download Page 12](http://html1.mh-extra.com/html/maytronics/classic-8/classic-8_user-instructions_1751357012.webp)
11
CLASSIC 8+ / TOP 8
|
User Instructions
7.4 Removing the Pool Cleaner from the water
Place the Pool Cleaner on the edge of the pool to let the water drain out.
Please use the cable to pull the robot to the surface, then use the handle.
7.4.3
Turn OFF the power supply.
WARNING
Using the blue cable, bring the Pool Cleaner to the pool edge.
Use the handle to remove the Pool Cleaner from the water.
7.4.1
7.4.2
WARNING
8. OFF SEASON STORAGE
If the Pool Cleaner will not be in use for an extended period, perform the following storage steps:
1. Make sure that no water is left in the Pool Cleaner.
2. Thoroughly clean the filters of the cartridges and insert them in place.
3. Roll up the cable so that it has no kinks and place on the Caddy.
4. Store the pool cleaner upright on the Caddy in a protected area out of direct sun/rain/frost at a
temperature of between 5˚-45˚C / 41˚-113˚F