Maytronics BASIC 2 Operating Instructions Manual Download Page 9

Page: 9 / 9

Robotic Pool Cleaner BASIC 2

| Operating Instructions

To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.

If the pool cleaner will not be in use for an extended
period, perform the following storage steps:

•

Make sure that no water is left in the pool cleaner.

•

Thoroughly clean the filter bag or cartridge and insert in
place.

•

Roll up the cable so that it has no kinks.

•

Store the pool cleaner upright on the Stand in
a protected area out of direct sun/rain/frost at a
temperature of between 5˚-45˚C / 41˚-113˚F.

5.5. Off-season storage

Cable

Summary of Contents for BASIC 2

Page 1: ...autions 2 4 POOL CLEANER PARTS 3 5 USING THE POOL CLEANER 4 5 1 Setup 4 5 2 Putting the Pool Cleaner into the pool 4 5 3 Removing the Pool Cleaner from the pool 5 5 4 Maintenance 6 5 4 1 Cleaning the filtration system 6 5 4 2 Cleaning the impeller 8 5 5 Off season storage 9 6 STAND ASSEMBLY 55 Robotic Pool Cleaner BASIC 2 Operating Instructions ...

Page 5: ...ng the Pool Cleaner from the pool The Pool Cleaner will perform automatic shut off at the end of the cleaning cycle Turn OFF and unplug the power supply CAUTION Using the floating cable bring the Pool Cleaner to the pool s edge CAUTION DO NOT PULL THE POOL CLEANER FROM THE POOL USING THE CABLE ...

Page 7: ...ng the cartridge filters Note Don t let the cartridge filters dry out before cleaning CAUTION Unplug the power supply With the pool cleaner upside down open the bottom lid and pull it out Click Clean the filters with a hose Open the clips and remove the filters ...

Page 8: ...t If you notice debris trapped in the impeller open the impeller and remove the debris Place the impeller cover at an angle so that the notch is on the second ring of the spring Press down on the impeller cover in the direction of the spring pushing it into place Replace the screws 5 4 2 Cleaning the impeller Unplug the power supply ...