Switch frequency selection
Dial Switch 12345 to choose the required FR/CH for 32 channels
Installation
1.
Mount the 5.8G antenna a picture shows
2.
Mount the propeller properly as picture shows
Connection diagram
[1] Negative solder pad for esc signal
[2] Solder pad for esc signal wire
[3] Positive solder pad for battery voltage
[4] Solder pad for esc signal wire
[5] Negative solder pad for esc signal
[6] Negative solder pad for battery voltage
[7] +5V
[8] GND
[9] 5.8G frequency-selection dial switch
[10] 5.8G antennas pedestal
[11] Solder pad for esc signal wire
[12] Negative solder pad for esc signal
[13] Negative solder pad for esc signal
[14] Solder pad for esc signal wire
[15] Positive solder pad for battery voltage
[16] Negative solder pad for battery voltage
[17]+5V
[18] GND
[19] Flight controller
[20] Positive solder pad for battery voltage
[21] Negative solder pad for battery voltage
