Maytag YMEDC465HW0 Use And Care Manual Download Page 14

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check “Troubleshooting” or visit  www.maytag.com/help. 

It may save you the cost of a service call. If you still need help, follow the instructions below. 

When calling, please know the purchase date and the complete model and serial number of your appliance.  

This information will help us to better respond to your request.

Maytag Services, LLC 

ATTN: CAIR

®

 Center 

P.O. Box 2370 

Cleveland, TN 37320-2370

Customer eXperience Centre 

Whirlpool Canada LP 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7

You can write with any questions or concerns at:

Whirlpool Canada LP 

Customer Assistance 

1-800-807-6777

Our consultants provide assistance with

Please include a daytime phone number in your correspondence.

If you need replacement parts or to order accessories

We recommend that you use only Factory Specified Parts.  

These parts will fit right and work right because they are made with the same precision 

used to build every new MAYTAG

®

 appliance. 

To locate factory specified replacement parts, assistance in your area, or accessories:

 

In the U.S.A.

Features and specifications on our full line of appliances.

Installation information.

Specialized customer assistance (Spanish speaking, hearing 

impaired, limited vision, etc.).

In the U.S.A. and Canada

Use and maintenance procedures.

Accessory and repair parts sales.

Referrals to local dealers, repair parts distributors, and service 

companies. Maytag

®

 designated service technicians are trained 

to fulfill the product warranty and provide after-warranty service, 

anywhere in the United States and Canada.

ASSISTANCE OU SERVICE

Avant de faire un appel pour assistance ou service, veuillez vérifier la section “Dépannage” ou visiter le site  

www.maytag.com/help. Cette vérification peut vous faire économiser le coût d’une visite de réparation.  

Si vous avez encore besoin d’aide, suivre les instructions ci-dessous.

Lors d’un appel, veuillez connaître la date d’achat et les numéros au complet de modèle et de série de votre appareil.  

Ces renseignements nous aideront à mieux répondre à votre demande.

Si vous avez besoin de pièces de rechange

Si vous avez besoin de commander des pièces de rechange, nous vous recommandons d’utiliser seulement  

des pièces spécifiées par l’usine. Ces pièces conviendront et fonctionneront bien parce qu’elles sont fabriquées selon  

les mêmes spécifications précises utilisées pour construire chaque nouvel appareil MAYTAG

®

.

Pour trouver des pièces de rechange spécifiées par l’usine dans votre région : 

Whirlpool Canada LP - Assistance à la clientèle 

1-800-807-6777             www.maytag.ca

 

Vous pouvez écrire en soumettant toute question 

ou tout problème au :

Customer eXperience Centre 

Whirlpool Canada LP 

Unit 200-6750 Century Ave 

Mississauga, Ontario L5N 0B7

Dans votre correspondance, veuillez indiquer un numéro 

de téléphone où on peut vous joindre dans la journée.

Nos consultants fournissent 

l’assistance pour :

Procédés d’utilisation et d’entretien.

Vente d’accessoires et de pièces de rechange.

Les références aux concessionnaires, compagnies de service 

de réparation et distributeurs de pièces de rechange locaux.

Les techniciens de service désignés par Whirlpool Canada LP 

sont formés pour remplir la garantie des produits et fournir un 

service après la garantie, partout au Canada.

ou contacter votre centre de réparation désigné le plus proche ou consulter l’annuaire téléphonique des Pages Jaunes.

Maytag Services, LLC 

1-800-688-9900

   

 www.maytag.com

Maytag (Accessories )- (US) 

1-800-344-1274

www.maytag.ca

®/™ ©2017 Maytag. All rights reserved. Used under license in Canada.  

Tous droits réservés. Emploi sous licence au Canada.

1

1

/17

Printed in U.S.A.

Imprimé aux É.-U.

W11185722A

W11185728A -SP

 (CA) 

1-800-688-2002

   

www.maytag.com/accessories

or call your nearest designated service center or refer to your Yellow Pages telephone directory.

Summary of Contents for YMEDC465HW0















Reviews: