10
WASHER MAINTENANCE
Replace inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
WATER INLET HOSES
CLEANING YOUR DISPENSER TRAY
IMPORTANT:
Dispenser trays are not dishwasher safe.
You may find laundry product residue leftover in your
dispenser trays. To remove residue, follow this recommended
cleaning procedure:
1.
Pull tray out until you feel resistance.
2.
Lift up slightly, and then continue pulling out.
3.
Wash in warm, soapy water, using a mild detergent.
4.
Rinse with warm water.
5
. Air dry, or dry with a towel, then place back into slot.
Operate your washer only when you are home. If moving, or
not using your washer for a period of time, follow these steps:
1.
Unplug or disconnect power to washer.
2.
Turn off water supply to washer, to avoid flooding due to
water pressure surge.
WINTER STORAGE CARE
IMPORTANT:
To avoid damage, install and store washer
where it will not freeze. Because some water may stay
in hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1.
Shut off both water faucets; disconnect and drain water
inlet hoses.
2.
Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE & SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3.
Unplug washer or disconnect power.
NON-USE AND VACATION CARE
CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes. To keep
washer interior odor-free, follow this recommended cleaning
procedure after every 30 washes:
1.
Make sure the washer is empty.
2.
Using recommended AFFRESH
®
washer cleaner, add one
tablet to washer drum.
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to liquid
chlorine bleach dispenser.
IMPORTANT:
Do not add detergent to CLEAN WASHER
with AFFRESH™ cycle. Do not use more than recommended
amount of bleach to avoid damaging product over time.
3.
Close washer lid.
4.
Press POWER.
5.
Select CLEAN WASHER with AFFRESH™ cycle.
6.
Press START/Pause/Unlock.
NOTE:
For best results, do not interrupt cycle. If cycle must
be interrupted, press POWER and run a RINSE & SPIN
cycle to ensure cleaner or bleach have been rinsed from
washer.
To clean exterior:
1.
Use a soft, damp cloth or sponge to wipe up any spills.
2.
Use all-purpose surface cleaner, if needed.
IMPORTANT:
To avoid damaging the washer’s finish, do not
use abrasive products.
Liqui
d chlorine
bleach dispense
r
TRANSPORTING YOUR WASHER
1.
Shut off both water faucets. Disconnect and drain water
inlet hoses.
2.
If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3.
Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain
hose from back of washer.
4.
Unplug power cord.
5.
Place inlet hoses and drain hose inside washer basket.
6.
Drape power cord over edge and into washer basket.
7.
Place packing tray from original shipping materials back
inside washer. If you do not have packing tray, place heavy
blankets or towels into basket opening. Close lid and place
tape over lid and down front of washer. Keep lid taped until
washer is placed in new location.
