Maytag Neptune MAH2400WH Installation Instructions Manual Download Page 5

STACKING KIT INSTALLATION

A special stacking kit is available to allow stacking of the dryer on top of
the washer. This is available as an accessory item and is available
through your selling dealer. The model number for the accessory kit is
MAL2424AXX

ADDITIONAL INFORMATION

50-HERTZ OPERATION

This Maytag appliance is manufactured for operation on 60 Hz AC approved electrical service. This model is
not designed for use on 50 Hz AC electrical services and conversion of the product from 60 to 50 Hz
operations is not recommended. For additional information on 50 Hz products, write:

MAYTAG INTERNATIONAL, INC.
8700 BRYN MAWR AVE.
CHICAGO, ILLINOIS 60631
Phone: 773-714-0100

FOR TECHNICAL ASSISTANCE, REPLACEMENT PARTS AND ACCESSORIES

For technical assistance or if your washer requires replacement parts or accessories, contact 

Maytag

Customer Service, toll-free 1-888-4-Maytag 

for information on the nearest authorized Maytag Parts

Distributor.
Proper installation is the responsibility of the owner; 

Service Calls Performed As A Result Of Improper Set-up,

Adjustment And/Or Connection Are The Responsibility Of The Installer.

UNPACKING THE WASHING MACHINE

Unpack your washing machine and inspect it for shipping damage and have you

have received all of the items shown on page 2. If the washing machine was

damaged during shipping or you do not have all of the items, contact your

Maytag dealer immediately.

5

MAYTAG INTERNATIONAL, INC.
1475 East Woodfield Road
Schaumburg, Illinois 60173
Phone: 847-273-3100

Summary of Contents for Neptune MAH2400WH









Reviews: