11
Reversibility Kit Instructions
If your model came with a Reversibility kit, please use the Brand
Badge Placement template and the following instructions to install
the Brand Badge on the opposite side of the freezer door.
Parts Included:
Brand badge removal tool
Brand badge template (on last page of User Instructions)
Door handle hole cap
Tools Needed:
Scissors
Masking tape
Freezer Door
1.
Using the removal tool (provided), remove the brand badge
from the freezer door by lifting up the right-hand side and
peeling the badge away from the door from right to left.
NOTE:
To avoid scratching the door, do not use a sharp or
metallic object to pry the brand badge from the door.
2.
Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water and
dry with a soft cloth.
3.
Cut the template along the dotted lines that match the shape
of the brand badge.
4.
Align the edges of the template with the side and top of the
freezer door and tape the template to the door.
NOTE:
When the template is correctly aligned, the hole in the
door, where the handle was, will be within the cutout of the
template, as shown.
5.
Using the cutout as a guide, press the brand badge onto the
freezer door making sure that the hole is completely covered.
6.
Slowly remove the template.
Adjust the Doors
IMPORTANT:
Your refrigerator complies with American
Disabilities Act (ADA) guidelines.
Door Closing
Your refrigerator has two front adjustable levelers - one on the
right and one on the left. If your refrigerator seems unsteady or
you want the doors to close easier, adjust the refrigerator's tilt
using the following instructions:
1.
Turn the leveler to lower or raise that side of the refrigerator. It
may take several turns to adjust the tilt of the refrigerator.
■
To raise, turn the leveler to the right.
■
To lower, turn the leveler to the left.
NOTE:
Having someone push against the top of the
refrigerator takes some weight off the levelers and rollers
which makes it easier to adjust.
2.
Open both doors again to make sure they close as easily as
you like. If not, tilt the refrigerator slightly more to the rear by
turning both leveling legs to the left; it may take several more
turns.
NOTE:
To keep the refrigerator level, you should turn both
leveling legs the same amount.
3.
Using a level, be sure that the refrigerator is still level side to
side. Readjust if necessary.
Door Aligning
If the space between your doors looks uneven, you can adjust it
using the following instructions:
1.
Depending on your model, remove the top hinge cover.
2.
Loosen the top hinge screws using a
⁵⁄₁₆
" socket or wrench.
3.
Have someone hold the door in place or put a spacer between
the doors while you tighten the top hinge screws.
4.
Replace the top hinge cover, if removed in Step 1.
