450386 - 1
Maytag Co.
5
Door Switch Removal
Open the main door. Remove the two Phillips head screws
attaching the door switch housing to the front panel.
Disconnect the two wires on the door switch. Remove the
two hex head nuts (and associated nuts and star washers)
holding the door switch to the door switch housing.
Top or Bottom Front Panel Removal
Top Panel
: Remove the lint drawer. Remove the computer
panel assembly. Remove the four screws for middle trim
panel then the ten screws holding the panel to the dryer. Lift
up and pull out the panel about 8-inches or so.
Disconnect the door switch wires (yellow wires) from the
connector, connected to the connector on the side of the
wrapper. Totally remove the panel from the dryer.
Bottom Panel
: Remove the lint drawer. Remove the ten
screws (this is the bottom only) on the front panel and remove
the four screws for bottom trim panel. Lift up and pull out
the panel about 8-inches or so. Disconnect the door switch
wires (yellow wires) from the connector, connected to the
connector on the side of the wrapper. Totally remove the
panel from the dryer.
Lint Door Switch Removal
Remove the lint drawer. Remove the one screw that is
holding the lint door switch, pull out the lint switch, disconnect
the two wires on it. Replace the switch.
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
➞
