6
Prepare dryer for leveling legs
1.
To avoid damaging floor, use a large flat piece of cardboard
from dryer carton; place under entire back edge of dryer.
Firmly grasp dryer body (not console panel) and gently lay
dryer down on cardboard.
Mobile home – Additional installation requirements
This dryer is suitable for mobile home installations. The
installation must conform to the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280).
■
Metal exhaust system hardware, available for purchase.
For further information, please reference the “Assistance
or Service” section of the Use and Care Guide.
■
Special provisions must be made in mobile homes to
introduce outside air into the dryer. The opening (such
as a nearby window) should be at least twice as large
as the dryer exhaust opening.
Install Leveling Legs
Screw in leveling legs
2.
Examine leveling legs and find diamond marking. Screw legs
into leg holes by hand. Use a wrench to finish turning legs
until diamond marking is no longer visible.
Now stand the dryer on its feet. Slide the dryer until it is
close to its final location. Leave enough room to connect
the exhaust vent.
For mobile home use
Gas dryers must be securely fastened to the floor.
Mobile home installations require a Mobile Home Installation
Hold-down Kit. For ordering information please reference
the Use and Care Guide.
diamond
marking
GAS DRYER POWER
HOOKUP
Gas Supply Requirements
W10486878Av3.indd 6
3/30/12 3:06 PM
Summary of Contents for MGDX5SPAW
Page 2: ...2 DRYER SAFETY ...
Page 3: ...3 ...
Page 19: ...19 SEGURIDAD DE LA SECADORA ...
Page 20: ...20 ...
