background image

8

OVEN USE

Odors and smoke are normal when the oven is used the first few 

times or when it is heavily soiled.

IMPORTANT:

 The health of some birds is extremely sensitive 

to the fumes given off. Exposure to the fumes may result in 

death to certain birds. Always move birds to another closed 

and well-ventilated room.

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. 

Press CANCEL to clear. When the oven is not in use, the time 

of day is displayed.

Tones

Tones are audible signals, indicating the following:

One Tone

 

Valid keypad press

 

Oven is preheated (long tone).

 

Function has been entered.

 

Reminder, repeating every 20 seconds after the end-of-cycle 

tones

Three Tones

 

Invalid keypad press

Four Tones

 

End of cycle

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed to 

Celsius.

To change:

 Press and hold the Temp/Time “+” arrow keypad 

for 5 seconds. “°C” or “°F” will appear on the display. Repeat 

to change back.
To exit mode, press CANCEL.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.

To change:

 Press and hold LIGHT for 5 seconds. Repeat to 

change back.
To exit mode, press CANCEL.

Demo Mode

IMPORTANT:

 This feature is intended for use on the sales floor 

with 120 V power connection and permits the control features 

to be demonstrated without heating elements turning on. If this 

feature is activated, the oven will not work.

To change:

 Press CANCEL, CANCEL, the Temp/Time “+” keypad, 

KITCHEN TIMER. Repeat to change back and end Demo mode.

Oven Temperature Control

IMPORTANT:

 Do not use a thermometer to measure oven 

temperature. Elements will cycle on and off as needed to provide 

consistent temperature, but they may run slightly hot or cool at 

any point in time due to this cycling. Most thermometers are slow 

to react to temperature change and will not provide an accurate 

reading due to this cycling.
The oven provides accurate temperatures; however, it may cook 

faster or slower than your previous oven, so the temperature can 

be adjusted to personalize it for your cooking needs. It can be 

changed in Fahrenheit or Celsius.

To Adjust Oven Temperature:
1. 

Press and hold the Temp/Time “-” keypad for 5 seconds until 

the oven display shows the current setting, for example “0°F 

CAL” or “00.”

2. 

Press the Temp/Time “+” or “-” keypad to increase or decrease 

the temperature in 5°F (3°C) amounts. The adjustment can be 

set between 30°F (18°C) and -30°F (-18°C).

3. 

Press START.

Keep Warm

IMPORTANT:

 Food must be at serving temperature before placing 

it in the warmed oven. Food may be held up to 1 hour; however, 

breads and casseroles may become too dry if left in the oven 

during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at 

serving temperature.

To Use:

1. 

Press KEEP WARM.

2. 

Press the Temp/Time “+” or “-” keypad to set the desired 

temperature. Press and hold to scroll quickly. The temperature 

will not scroll past the minimum or maximum allowable 

temperature.

NOTE:

 The temperature may be changed at any time by 

pressing the Temp/Time “+” or “-” keypad to enter the desired 

temperature and then START.

3. 

Press START.

4. 

Place food in the oven.

5. 

Press CANCEL when finished.

6. 

Remove food from the oven.

To Cancel Keep Warm:
1. 

Press CANCEL.

2. 

Remove food from oven.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before 

or after cooking.
Doing so can result in food poisoning or sickness.

Summary of Contents for MER6600FZ

















Reviews: