Maytag MER4351AA, Use And Care Manual

Page: 12 / 20

11
Oven Cooking
Setting the Clock
1. Press the Clock pad.
• The clock time cannot be set if the control is
programmed for a bake, broil or timing operation.
2. Set the correct time of day using the More+ or Less-
pads. If the More+ or Less- pad is not pressed within 30
seconds, the program will cancel. Press the
Clock pad and
begin again.
Setting the Timer
The timer can be set from one minute (:01) up to 99 hours and
59 minutes (99:59). Time will be displayed in minutes and not
in seconds.
THE TIMER DOES NOT CONTROL THE OVEN.
1. Press the Timer pad.
• 0:00 will light and the colon (:) will flash in the display.
2. Press the More+ or Less- pad until the desired time is
displayed.
• The timer will begin as soon as the time is set.
• The flashing colon indicates that a timing operation is in
progress. (The colon will not flash if the time of day or
oven temperature is displayed.)
• Two short beeps signal the end of the operation. “0:00”
will appear in the display.
• If desired, press the Clock pad and the time of day will
briefly reappear in the display during a timing operation.
• If desired, press the Bake or Broil pads and the current
temperature setting will briefly reappear in the display
during a timing operation.
To cancel the timer operation:
Press and hold the Timer pad for several seconds.
Manual Clean Oven Control
(select models)
Using the Touchpads
• Press the desired pad.
• Press the More+ or Less- pad to enter time or temperature.
• A beep will sound each time a function pad is pressed. There
is no beep for the More+ or Less- pad.
• A double beep will sound if a programming error occurs.
Bake Use for baking and roasting.
Broil Use for broiling and top browning.
Timer Sets Timer.
Clock Use to set time-of-day clock.
CANCEL Cancels all operations except Timer and Clock.
More+ or Enters or changes time, oven temperature.
Less- Sets HI or LO broil.
Important: Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered. If
more than 30 seconds elapse between touching a function
pad and the More+ or Less- pad, the function will be
canceled and the display will return to the previous display.
Setting the Controls For Baking or Roasting:
Baking, Roasting and Broiling
1. Press Bake pad.
• 000 will light and the Bake indicator will flash in the display.
• If you press the Bake pad and do not set an oven
temperature within 30 seconds, the program will
automatically cancel and the time of day will reappear
in the display.
2. Press the More+ or Less- pad until the desired oven
temperature is displayed.
• The oven temperature can be set from 170 ° to 550 ° F.
• 350 ° will appear in the display when either More+ or Less-
pad is pressed once.
• Press and tap the More+ or Less- pad to change the oven
temperature by 5 ° increments or press and hold the More+
or Less- pad to change the oven temperature by 10 °
increments.
• 100 ° or the actual oven temperature, whichever is higher,
will appear in the display when the oven turns on.
• The temperature in the display will increase in 5 °
increments until preset temperature is reached. A single
beep will sound when the oven is preheated.
• Allow 10 to 15 minutes for the oven to preheat.
• To recall preset temperature during preheat, press the
Bake pad. The temperature will be displayed for three
seconds.
• To change oven temperature during cooking , press
the Bake pad, then press the More+ or Less- pad until
the desired temperature is displayed.
• To change oven temperature during preheat , press
the Bake pad twice , then press the More+ or Less- pad
until the desired temperature is displayed.
3. Place food in the oven. Check food for doneness at the
minimum cooking time.