Maytag MDE9651 Operating Instructions Manual Download Page 4

4

Safety instructions

General

• Read and keep the Use & Care Guide! 

• Electrical installation, if required, should 

be carried out by qualified professionals.

• The machine should only be used for 

tumble-drying as described in these 

instructions.

• Repairs and maintenance relating to 

safety or performance must be carried out 

by a qualified professional. 

• Damaged mains cables must only be 

replaced by a qualified professional.

• Sufficient ventilation is required to pre-

vent smoke from open fires or fumes 

from equipment burning other fuels being 

sucked into the room.

Installation

See the “Installation” chapter.

Safety

The machine must not be used for drying 

items that have been dry-cleaned at home 

or fabrics that may contain residues of flam-

mable liquids.

The tumble dryer is protected by an over-

heating cut-out. This shuts off the machine 

if the temperature gets too high.

A float shuts off the machine in the event 

of a blockage in the condensed water hose 

or if there is a risk of the condensed water 

container overflowing.

Stopping a programme

You can stop a drying programme by:

• opening the door; the drum stops auto-

matically, 

• or by pressing the main power switch. 

• When you want to resume tumble-drying, 

simply close the door and press the Start/

Stop button. 

• You can also stop a programme by press-

ing the Start/Stop button for three sec-

onds. 

Transport/Winter storage

If you need to move your machine or store it 

over the winter in unheated premises, then 

make sure you drain the condensed water 

container beforehand.

Packing material

Sort waste in accordance with local guide-

lines.

Disposal

When the machine has reached the end of 

its service life and is to be disposed of, it 

should immediately be made unusable.

Contact your local authority for information 

about where your old machine should be 

disposed of and recycled in the proper way.

The machine is manufactured and labelled 

to facilitate recycling.

Caution

During operation, the back of the tumble 

dryer will get very hot. Leave the machine to 

cool completely before touching the back.

Summary of Contents for MDE9651

























Reviews: