6
Tools Needed:
203 mm (8")
203 mm (8") or 254 mm (10")
Flat-blade screwdriver
Phillips screwdriver
or 254 mm (10")
Adjustable wrench
Pipe wrench
that opens to 25 mm (1")
Torx T20
®†
Security
25 mm (1") Hex-head
8 mm (5/16") Socket wrench
Pliers
screwdriver or bit
socket wrench
(that open to 39 mm [1
9
/
16
"])
Level
Utility knife
6 mm (1/4") Nut driver
Locking pliers
Caulk gun and caulk
Vent clamps
Pipe-joint compound
686 mm (27") Wood block
(for installing new exhaust vent)
suitable for gas type
Flashlight (optional)
13 mm (1/2") and 14 mm
Ruler or measuring tape
Putty knife
(9/16") Open-end wrenches
TOOLS & PARTS
†® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
NOTE:
The circuit diagram for this dryer is located inside the lower front panel, within the Tech Sheets.
Parts Supplied:
Foot boots (4)
Leveling legs (4)
PD models: Cam for service
PN models: Card reader
door lock
bezel, card reader wire
harness,
hardware
NOISE:
Sound Pressure Level, Lpa: 58 dBA (uncertainty,
Kpa: +/–10 dBA).
Technical Specifications:
Clothes Capacity:
220–240 V, 50 HZ. AC 4575 W
9 kg max.
Total mass: 68 kg max.
Summary of Contents for MDE25PD
Page 94: ...94 NOTAS...
Page 95: ...95 NOTAS...
