13
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
Cleaning the drain filter
•
In case "Pump-Model" drain hose, this filter’s equipped at the back side of washer.
•
This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
•
If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1
Pull the Fiter frame up-
ward.
2
Turn the lint filter inside
fout, wash to the lint of
3
Return the filter as it was,
and insert the filter frame
1
Pull the power
plug out before
cleaning it.
2
Turn off the water
supply to the
washer and
sperate the inlet
hose.
3
Pull the inlet filter
out.
4
Remove the dirt
from the inlet
filter with a brush.
Cleaning the water inlet filter
•
Clean the filter when water leaks from, the water inlet.
with water
Filter Frame
Lint Filter
into the slot
1
Bring down the remaining
water in the hose. And
put a container under the
filter to collect water.
2
Turn the cap counter
clockwise.
3
Pull out the filter assembly
off the case.
4
Clean the drain filter
removing foreign objects.
5
Put the filter into the case.
And turn the cap to adjust
the prominence of the filter
to the hole of the case.
6
Turn the cap clockwise
tightly.
1
Pull the cap agitator
upward.
2
Pull the filter lint
upward.
3
Turn the filter lint
upside down, wash to
the lint off with water.
4
Return the filter assy as
it was, and insert it into
the pulsator agitator.
