Maytag MAV MAV-2, Use And Care Manual

Page: 7 / 48

6
Select Cycle
To select a cycle, push the control dial in and turn it to
the right (clockwise) until the pointer is at the soil level
needed for the wash load.
IMPORTANT:
For optimum fabric care, the
appropriate wash and spin speed for the load type
must be selected using the wash/Spin Speed knob.
Regular Cycle
This cycle provides up to 16 minutes of agitation.
Select the
Regular Wash/Spin Speed setting.
Perm Press
This cycle is designed for sturdy fabrics needing a
slower spin speed to reduce wrinkling, such as dress
shirts and dress pants.
Select the
Permanent Press Wash/Spin Speed
setting.
Delicates Cycle
This cycle is designed for items requiring delicate wash
action. Select the
Delicate Wash/Spin Speed setting.
When washing delicate fabrics labeled hand wash,
select the
Handwash Wash/Spin Speed
setting. This
setting provides intermittent slow agitation and soak
with a slow spin.
STEP 4
STEP 6
Pull Control Dial Out to Start
You may stop the washer at any time by simply
pushing the control dial
in
. Therefore it is possible to
obtain a non-agitated soak or to shorten, skip or
repeat any part of a cycle. The control dial must be
pushed
in (off position) when you change the setting.
Note:
Do not
attempt to turn the control dial
counterclockwise. Damage to the timer will result.
STEP 5
Select Options
(if desired)
Extra Rinse
When the switch or knob is in the
On
position, an
additional rinse at the end of the Regular, Permanent
Press and Delicates cycles is provided to more
completely remove laundry additives, suds, perfumes,
etc.
End of Cycle Signal (select models)
The end of cycle signal will sound once the cycle is
completed. On select models, the end of cycle signal
can be canceled by setting the switch to
Off.
Cycles and options vary by model. Cycles and options vary by model.