background image

10

Washing

Sort your laundry

See the Advice and Tips section be-

fore washing.

Note!

Empty pockets. Coins, nails and the like 

can cause damage to the machine and 

fabrics.

Turn on the main power 

switch

Open the washer door and 

load the washing

If the door is closed, press the Key 

button (door open). The red field 

lights up and the door opens after a few 

seconds. Load the laundry. The laundry 

programme chart shows how much laundry 

can be washed with each programme.

Add detergent and fabric 

softener, as required

The detergent packaging will have 

recommendations for how much de-

tergent you should use. The machine holds 

6.0 kg of laundry. If you only have a small 

amount of washing in the machine, you can 

reduce the amount of detergent used.

Powder detergent

Pour the powder into the compartment for 

the main wash, and pre-wash as well if 

desired.

Liquid detergent

When using liquid detergent, follow the de-

tergent manufacturer’s recommendations.

Wash ball or net

If you use a wash ball or net, place it dir-

ectly in the drum and select a programme 

without pre-wash.

Note!

Detergent overdosing does not give better 

washing results, but merely causes a great-

er impact on the environment.

Try to use less detergent, and increase only 

if you are not satisfied with the results.

Fabric softener

Pour the fabric softener into the compart-

ment with the   symbol. Use the dosage 

given in the recommendations on the fabric 

softener package.

Note!

Do not fill above the compartment’s maxi-

mum fill level. Otherwise fabric softener will 

run in too early, which impairs the washing 

effect.

1

2

3

4

Fabric softener

Pre-wash 

Main wash

Summary of Contents for MAF9501

























Reviews: