INSTALLATION
3
MOUNTING THE DUCTLESS CONVERSION HOUSING
1. The ductless conversion housing is
mounted under a kitchen cabinet unit
2. Begin installation by installing wood
blocking under cabinet as required.
3. Temporarily position the ductless
conversion housing in the desired
mounting location. Measure and mark
the mounting holes, and electrical
access locations with a pencil.
4. Drill out the required openings for
electrical access.
5. Fasten mounting screws into the
cabinet wood blocking as marked.
do not completely tighten the screws,
leaving half of the length exposed.
6. Rout electrical cable through knock out
opening.
7. Hang the ductless conversion housing
onto screws through key holes and tighten.
8. Temporary remove the diffuser panels from
the range hood.
9. Connect the electrical cable to the range
hood and screw the hood onto the ductless
conversion housing.
10. Position the carbon filters onto the diffuser
panels, and attach with rectangular washer
and screw as shown.
11. Re-install the diffuser panels.
12. Carbon filters must be replaced after
every 120 hours of use (or approximately
every 2-3 months based on the average
of 1-2 hrs. OK daily cooking time).
