10
Oven Cooking
Self-Clean Oven Control
(select models)
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)
Using the Touchpads
• Press the desired pad.
• Press the
▲
or
▼
pad to enter time or temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
A
Broil
Use for broiling and top browning.
B
Bake
Use for baking and roasting.
C
▲
or
▼
Enters or changes time, oven
(More or Less)
temperature. Sets HI or LO broil.
D
Timer
Sets timer.
E
Cook & Hold
Bakes for a preset time, then holds food
warm for 1 hour.
F
Clean
Use to set self-clean cycle.
G
Delay
Programs the oven to start baking at
a later time.
H
Clock
Use to set time-of-day clock.
I
Keep Warm
Use to keep cooked food warm in oven.
J
CANCEL
Cancels all operations except timer
and clock.
A B
C D
E F G H I J
Note:
Four seconds after pressing the
▲
or
▼
pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the
▲
or
▼
pad, the function will be canceled and the
display will return to the previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and Delay
pads for three seconds.
2. Press the
▲
or
▼
pad to select 12
or 24 hour.
3. Set the time of day following the
directions below.
To set the Clock:
1. Press the Clock pad.
• Time of day and the colon flash in the
display.
2. Press the
▲
or
▼
pad to set the time of day.
• Colon continues flashing.
3. Press the Clock pad again or wait four
seconds.
When electrical power is supplied or after a power
interruption, the last clock time before power was
interrupted will flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for cook or clean Delay or Cook & Hold.
