background image

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check 
“Troubleshooting” or “Problem Solver.” It may save you the cost 
of a service call. 
If you still need help, contact the dealer from whom you 
purchased the refrigerator.

If you need replacement parts

Look for quality replacement parts whenever you need a 
replacement part for your refrigerator. 
To locate factory specified replacement parts in your area, contact 
the dealer from whom you purchased your refrigerator.

Warranty

Contact the dealer from whom you purchased the refrigerator for 
warranty information.

Keep this book and your sales slip together for future 
reference. You must provide proof of purchase or installation 
date for in-warranty service.

Write down the following information about your appliance to help 
you obtain assistance or service if you ever need it. You will need 
to know your complete model number and serial number. You can 
find this information on the model and serial number label, located 
on the inside wall of the refrigerator compartment.

Dealer name____________________________________________________

Serial number __________________________________________________

Address ________________________________________________________

Phone number __________________________________________________

Model number __________________________________________________

Purchase date __________________________________________________

DOORS AND LEVELING

Possible Causes and/or Recommended Solutions

Doors are difficult to open

Gaskets are dirty or sticky - Clean the gaskets and contact surfaces with mild soap and warm 
water. Rinse and dry with a soft cloth.

Doors will not 
close completely

Door is blocked open - Move food packages away from the door. Make sure all bins and 
shelves are in their correct positions. Make sure all packaging materials have been removed.

Doors appear to be uneven

Doors need to be aligned, or refrigerator needs to be leveled - See the leveling and door 
alignment instructions.

Refrigerator rocks 
and is not stable

Refrigerator is not level - To stabilize the refrigerator, remove the base grille and lower the 
leveling feet until they touch the floor. See the leveling and door alignment instructions.

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

W10581529A

®

/™ ©2013. All rights reserved.

6/13

Printed in Mexico

Summary of Contents for 8MSF25N4BW00













Reviews: