34
CYCLE GUIDE — TIMED CYCLES
Settings and options shown in
bold
are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return
to the default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Any load
Timed Dry
High 40
Wrinkle Prevent
†
Use to dry items to a damp level for items that do
NOTE:
Select
Medium
Extra Power
not require an entire drying cycle. Select a drying
AirDry to dry foam,
Low
temperature based on the type of fabrics in your
rubber, plastic,
AirDry
load. If you are unsure of the temperature to select
or heat-sensitive
for a load, select the lower setting rather than the
fabrics.
higher setting.
Small loads
Quick Dry
High 15
Wrinkle Prevent
†
For small loads of 3–4 items.
and sportswear
Medium
Low
AirDry
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
CYCLE GUIDE — STEAM CYCLE (on some models)
Settings and options shown in
bold
are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Small load:
Fill the dryer drum with 3–4 items, not more
than 1/4 full.
Medium load:
Fill the dryer drum up to about 1/2 full.
Large load:
Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Shirts, blouses,
Steam Refresh
High 20
Wrinkle Prevent
Use to reduce light wrinkles from loads left in the
and slacks
dryer too long. Do not add dryer sheets.
Items
to refresh:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Adjusting drying time on Timed Cycles
When you select a Timed
Cycle, the time appears in
the display. Use More Time
and Less Time to increase
or decrease the time
in 5-minute increments.
The maximum dry time
is 150 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
mediumweight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (AirDry) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE:
If you have questions about drying temperatures
for various loads, refer to the care label directions.
†
On steam models, you may select the “+Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium drying
temperature settings.
AirDry
High
Less
More
Off
+Steam
Sensing
Cool Down
Check Vent
Wet Damp
Appearance may vary.
NOTE:
Government energy certifications for this model were based on the Normal Cycle, Highest Temperature Setting, Normal Dryness
Level. The as-shipped defaults were the same as the Government Energy Certification Settings except the Default Temperature Setting
of Medium was adjusted to the Highest Temperature Setting.
11-Jan-2019 10:47:53 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
