Maytag 25 series Manual Download Page 36

Page: 36 / 100

BRANSON 25 SERIES

LXN5O187A

LXN5O178A

LXN5O177A

Pay special attention when on a
slope or loading ramps:

Pay special attention to driv-
ing on a slope or the loading
ramps.

[Otherwise]

There is a risk of accident that
the tractor may slip, roll, or
overturn.

•

WARNING

Remove spilled excess fuel be-
fore starting engine:

After filling the fuel tank, close

the fuel filler cap complete-
ly and wipe off the excess fuel
thoroughly.

[Otherwise]

It may result in a fire accident or

environmental pollution.

•

DANGER

Turn off engine in a flat area when

leaving the tractor:

When leaving the tractor, park
the  tractor  on  a  flat  and  safe
area,  turn  off  the  engine,  and
apply  the  parking  brake. Also,
let  the  implement  rest  on  the
ground.

[Otherwise]
The tractor may move and cause
an accident.

•

WARNING

BRANSON 25 SERIES 트랙터-영문판-01.ind24 24

2015-04-29 오후 1:43:20

Summary of Contents for 25 series





































































































Search results

Summary of Contents for 25 series

Reviews:

Brands by name

Popular brands

Maytag 25 series, Manual

Search results

Summary of Contents for 25 series

Reviews:

Brands by name

Popular brands