Maytag 1999 Sloped-Front, Service Manual

Page: 31 / 102

© 2000 Maytag Appliances Sales Company
16010279
(16009968-01) Section 4. Console Assembly
4-3
CONSOLE WITH MEMBRANE PAD
The replacement console assembly consists of
the console, medallion and membrane pad.
CONSOLE REMOVAL
1. Disconnect power to the unit.
2. Remove the four screws securing the
console to the rear cover plate.
3. Lay a drop cloth across the top cover of the
washer.
4. Grasp the top of the console and gently
rock the top of the console forward away
from the rear console back. Note the
hooked tabs on bottom of the console,
which engage the slots in the top cover.
Warning - Always shut off
electrical power to the
dryer before beginning any
Figure 4-8
5. For reinstallation, reverse the
aforementioned steps.
MICROPROCESSOR BOARD
REMOVAL
1. Disconnect power to the dryer.
2. Remove the console assembly.
3. Carefully remove the membrane pad
harness and other wires from the
microprocessor board.
Figure 4-9
Figure 4-10
Figure 4-11
MODELS: MDE/DG5500, 7500