22
WASHER DRAIN SYSTEM
The washer can be installed using the standpipe drain system
(floor or wall), the laundry tub drain system, or the floor drain
system.
Standpipe drain system – wall or floor
The standpipe drain requires a minimum diameter standpipe of
2" (50 mm). The minimum carry-away capacity can be no less than
10 gal. (38 L) per minute
.
The top of the standpipe must be at least 30" (762 mm) high and
no higher than 96" (2.4 m) from the bottom of the washer.
Laundry tub drain system
The laundry tub needs a minimum 20 gal. (76 L) capacity.
The top of the laundry tub must be at least 30" (762 mm)
above the floor.
Floor drain system
The floor drain system requires a siphon break that may be
purchased separately.
The siphon break (Part Number 285834) must be a minimum of
28" (710 mm) from the bottom of the washer. Additional hoses
might be needed.
Floor
30" min.
(762 mm)
30"
(762 mm)
28"
(710 mm)
Syphon-
break
Wall
Summary of Contents for MHN33PDCGW
Page 122: ...122 NOTES ...
Page 123: ...123 NOTES ...
