Maytag Commercial MAT20PDFGW, Instructions Manual

Page: 16 / 120

16
CODE EXPLANATION
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3.xx SPECIAL TIME CYCLE PRICE*
3.07
DELICATES
DELICATES Special Price Cycle Amount to Start. Represents
the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
3.07
NORMAL ECO
NORMAL ECO Special Price Cycle Amount to Start. Represents
the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g
Press the NORMAL keypad once to advance to next code.
3.07
POWERWASH
POWERWASH Special Price Cycle Amount to Start. Represents
the number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g Press the NORMAL keypad once to advance to next code.
3.08
NORMAL
NORMAL Special Price Cycle Amount to Start. Represents the
number of Coins or Debit pulses required to start the Special
Price cycle. See Value of Coin 1. Adjustable from 0 to 200.
PD models default setting is 7 - PR models default setting is 0.
g
Press the NORMAL keypad once to advance to next code.
5.00 TIME-OF-DAY CLOCK, MINUTES
5.00 This is the TIME-OF-DAY CLOCK, minute setting; select
between 0 and 59 minutes by pressing the POWERWASH or
TEMPERATURE keypad.
g Press the NORMAL keypad once to advance to next code.
6.00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hours clock.
6.00 This is the TIME-OF-DAY CLOCK, hour setting; select between
0 and 23 hours by pressing the POWERWASH or TEMPERATURE
keypad.
g Press the NORMAL keypad once to advance to next code.
7.00
SPECIAL PRICE START HOUR*
NOTE: Uses military time or 24 hours clock.
7.00 This is the start hour; select between 0 and 23 hours by pressing
the POWERWASH or TEMPERATURE keypad.
g Press the NORMAL keypad once to advance to next code.
8.00 SPECIAL PRICE STOP HOUR*
NOTE:
Uses military time or 24 hours clock.
8.00 This is the stop hour; select between 0 and 23 hours by pressing
the POWERWASH or TEMPERATURE keypad.
g
Press the NORMAL keypad once to advance to next code.
9.00 SPECIAL PRICE DAY*
9.10 This represents the day of the week and whether special pricing
is selected for that day. A number followed by “0” indicates no
selection that particular day (9.10). A number followed by an “S”
indicates selected for that day (9.1S).
Days of the week (1–7) can be chosen by pressing the
POWERWASH keypad. Press the POWERWASH keypad once to
select special pricing for each day chosen.
When exiting set-up code “9,” the display must show current day
of week:
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1 = Sunday 1S
20 Day 2 = Monday 2S
30 Day 3 = Tuesday 3S
40 Day 4 = Wednesday 4S
50 Day 5 = Thursday 5S
60 Day 6 = Friday 6S
70 Day 7 = Saturday 7S
g Press the NORMAL keypad once to advance to next code.
CODE EXPLANATION
A.00
VAULT VIEWING OPTION*
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
A.00 Not Selected “OFF.”
A.SC Selected “ON.” Press the DELICATES keypad once for this selection.
When selected, the money and/or cycle counts will be viewable
(depending on what is selected) when the coin box is removed.
g Press the NORMAL keypad once to advance to next code.
b.05
VALUE OF COIN 1*
b.05 This represents the value of coin 1 in number of 5% increments
of the larger coin value 5 x 5% = 25%.
By pressing the POWERWASH or TEMPERATURE keypad, there is
the option of between 1 and 199 for the quantity of 5% increments.
g Press the NORMAL keypad once to advance to next code.
C.20 VALUE OF COIN 2*
C.20 This represents the value of coin 2 in number of 5% increments
of the larger coin value 2 x 5% = 100%.
By pressing the POWERWASH or TEMPERATURE keypad, there is
the option of between 1 and 199 for the quantity of 5% increments.
g
Press the NORMAL keypad once to advance to next code.
d.00 COIN SLIDE OPTION
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
d.00 Not Selected “OFF.”
d.CS Selected “ON.” Press the DELICATES keypad three consecutive
times for this selection.
When coin slide mode is selected, set “b.” equal to value of slide
in 5% increments. Set Step 6 (regular cycle price) and Step 3
(special cycle price) to number of slide operations. If the installer
sets up “CS” on a coin drop model, it will not register coins.
g Press the NORMAL keypad once to advance to next code.
E.00 ADD COINS OPTION*
This option is either SELECTED “ON” or NOT SELECTED “OFF.”
This option causes the customer display to show the number
of coins (coin 1) to enter, rather than the monetary amount.
E.00 Not Selected “OFF.”
E.AC Selected “ON.” Press the DELICATES keypad three consecutive
times for this selection.
g
Press the NORMAL keypad once to advance to next code.
H.00
COLD
COLD Temperature Upgrade* - Represents the amount of Coins
or Debit pulses required to purchase the Cold Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00
COOL
COOL Temperature Upgrade* - Represents the amount of Coins
or Debit pulses required to purchase the Cool Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00
WARM
WARM Temperature Upgrade* - Represents the amount of Coins
or Debit pulses required to purchase the Warm Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 0.
g Press the NORMAL keypad once to advance to next code.
H.00
HOT
HOT Temperature Upgrade* - Represents the amount of Coins
or Debit pulses required to purchase the Hot Temp Upgrade.
Adjustable between 0 and 40. Factory default is set for 1 on PD
models and set for 0 on PR models.
g Press the NORMAL keypad once to advance to next code.
H.00
HEAVY
HEAVY SOIL Upgrade* - Represents the amount of Coins or Debit
pulses required to purchase the Heavy Soil Upgrade. Adjustable
between 0 and 40. Factory default is set for 1 on PD models and
set for 0 on PR models.
g Press the NORMAL keypad once to advance to next code.