170912 v3.1cd
Operating instructions SG-RSV 206/X
Page7/14
4.2
1
2
3
4
5
6
SG-RSV 206/X
Installation
DANGER
Danger of injury from electric shock!
Ä
Disconnect all devices and live parts in the immediate environment from the
power supply and secure them to prevent them from being switched on again
(see relevant operating instructions).
Ä
Check whether all devices and parts are de-energised.
CAUTION
Impaired operation due to overheating
If the control unit overheats, operation of the protection device may be impaired.
Ä
When installing the product in a switch cabinet, ensure sufficient clearance
from heat sources (at least 2 cm).
1. Fix the control unit in any position with Ø 4 mm screws or secure it using cable
ties.
2. Mount the control unit
- on a level installation surface
- with the rear side and type plate pointing towards the assembly surface. The
raised lettering must not face the assembly surface; otherwise, it will result in
a bending moment.
CAUTION
Impaired operation due to mechanical loads
Incorrect installation can generate a bending moment. The bending moment can
impair operation of the protection device.
Ä
Avoid any kind of bending moment.
