5 |
P a g e
POLED PORCH AWNING MP9540 USER GUIDE
Buckle together the sizing strap between each leg to achieve the correct spacing. Peg
down each leg at the base and all pegging points found on each side.
Once in position; peg down the 2 guy ropes found at the front of the awning and fully
tension. It is recommended each peg is driven fully into the ground at an angle of 45
Degrees away from the pegging point.
Rear pad poles are included to enable the awning to be firmly held against the vehicle.
Pre-assemble the rear poles and secure to the rear corner foam pads with the velco
attachments. The poles can be adjusted to suit the height of the vehicle.
To pitch the front canopy; pre assemble the steel canopy poles and attach the plastic
feet to the base. Extend the front door and insert the top spike on each pole into the
corner eyelets of the front door. Peg down the plastic feet of the canopy poles. Attach
guy ropes to the top of both canopy poles. Peg down the guy ropes and fully tension
once in position.